...

Welcome to our Heinrich Brothers!

Hinged Steel Belt Conveyors

  • Home
  • Hinged Steel Belt

There are several basic configurations for the rugged and long-lasting hinged steel belt conveyor.
These steel hinged belt conveyors are typically used in rugged applications, such as handling scrap metal, metal chips, stampings, forgings, fasteners, turnings, die cast parts and castings.

The design of the unit allows these steel hinged belt conveyors to operate continuously, whether it’s an incline, decline or level. This flexibility minimizes downtime even in the most demanding wet or dry conditions.

Hinged steel belt conveyors are designed for maximal lifetime and minimal service requirements. The steel belt conveyor has a flexible design to meet the most diverse installation layouts.
The hinged steel belt conveyor design has robotic welded plates for long life. These conveyors have a robust design of both belt and trough to cope with tough applications.
The three basics models of hinged steel belt conveyors follow. Each hinged belt conveyor type has a PDF schematic for download.

Models of Hinged Steel Belt Conveyors

 

Awesome Image
SHBH – Steel Hinged Belt Conveyor, Horizontal

Steel Hinge Belt Conveyors are available in a variety of configurations (Z, L, P, H) and with a variety of incline angles. Designed for heavy duty use, they are typically configured for use in machining or stamping applications for part or scrap removal.

Download PDF

SPECIFICATIONS

BELT WIDTH: 8″ – 36″
LENGTH OF INCLINE: 52″ – 324″
BEGINNING ELEVATION: 8″ – 48″
ENDING ELEVATION: 36″ – 126″
SPEED: 10 – 45 FPM
INCLINED ANGLE: 30°, 45°, 60°
FEEDER LENGTH: 12″ – 120″
NOSEOVER LENGTH: 15″ – 120″
BELT: Standard is 2-1/2” pitch steel hinge, dimpled, standard chain with outer side bars. Optional belts are dimpled or perforated, with or without outer side bars. Optional 1-1/2” steel cleats at various center distances are available.
DRIVE: Standard drive is end drive, overhead, right hand side.
MOTOR: 1/2 HP through 1 HP. Energy efficient, inverter duty and brake motors also available. Voltages include 120/1/60, 230/3/60, 460/3/60 and 575/3/60 & DC Voltage.
SUPPORT CENTERS: Standard supports are on nominal 10’ centers.
FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors include green, beige, gray, orange, black and yellow.

Awesome Image
SHBL – Steel Hinged Belt Conveyor L Shape

Steel Hinge Belt Conveyors are available in a variety of configurations (Z, L, P, H) and with a variety of incline angles. Designed for heavy duty use, they are typically configured for use in machining or stamping applications for part or scrap removal.

Download PDF

SPECIFICATIONS

BELT WIDTH: 8″ – 36″
LENGTH OF INCLINE: 52″ – 324″
BEGINNING ELEVATION: 8″ – 48″
ENDING ELEVATION: 36″ – 126″
SPEED: 10 – 45 FPM
INCLINED ANGLE: 30°, 45°, 60°
FEEDER LENGTH: 12″ – 120″
NOSEOVER LENGTH: 15″ – 120″
BELT: Standard is 2-1/2” pitch steel hinge, dimpled, standard chain with outer side bars. Optional belts are dimpled or perforated, with or without outer side bars. Optional 1-1/2” steel cleats at various center distances are available.
DRIVE: Standard drive is end drive, overhead, right hand side.
MOTOR: 1/2 HP through 1 HP. Energy efficient, inverter duty and brake motors also available. Voltages include 120/1/60, 230/3/60, 460/3/60 and 575/3/60 & DC Voltage.
SUPPORT CENTERS: Standard supports are on nominal 10’ centers.
FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors include green, beige, gray, orange, black and yellow.

Awesome Image
SHBZ – Steel Hinged Belt Conveyor Z Shape

Steel Hinge Belt Conveyors are available in a variety of configurations (Z, L, P, H) and with a variety of incline angles. Designed for heavy duty use, they are typically configured for use in machining or stamping applications for part or scrap removal.

Download PDF

SPECIFICATIONS

BELT WIDTH: 8″ – 36″
LENGTH OF INCLINE: 52″ – 324″
BEGINNING ELEVATION: 8″ – 48″
ENDING ELEVATION: 36″ – 126″
SPEED: 10 – 45 FPM
INCLINED ANGLE: 30°, 45°, 60°
FEEDER LENGTH: 12″ – 120″
NOSEOVER LENGTH: 15″ – 120″
BELT: Standard is 2-1/2” pitch steel hinge, dimpled, standard chain with outer side bars. Optional belts are dimpled or perforated, with or without outer side bars. Optional 1-1/2” steel cleats at various center distances are available.
DRIVE: Standard drive is end drive, overhead, right hand side.
MOTOR: 1/2 HP through 1 HP. Energy efficient, inverter duty and brake motors also available. Voltages include 120/1/60, 230/3/60, 460/3/60 and 575/3/60 & DC Voltage.
SUPPORT CENTERS: Standard supports are on nominal 10’ centers.
FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors include green, beige, gray, orange, black and yellow.

Get in Touch

You will find yourself working in a true partnership that results in an incredible experience, and an end product that is the best.

Call us on

(724) 969-1188