Ball Table

These units are designed to be placed on an existing work table, scissor table or cart.

Download PDF

WIDTH: 12″ – 50″
LENGTH: 12″ – 120″
BALL CENTERS: 1-1/2” (staggered only), 2″, 3″, 4″, 6″
BALL TRANSFER: Standard 1″ diameter steel ball transfer with 1/4-20 UNC stud mount. Optional ball transfers include stainless steel surface, nylon surface and steel surface with flange.
BALL COVER: Standard is no ball cover. Optional ball cover available.
FRAME: Standard 12ga formed steel plate with angle stiffeners located on nominal 12″centers and on both ends.
MOUNTING: Standard 7/16″ mounting holes on both ends.
GUARDRAIL: Standard is no guardrail. Optional 12ga formed steel angle side and end guardrails. 2″, 3″, 4″ height. Available one side or both sides.
FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors include green, beige, gray, orange, black and yellow.

Designed as a free-standing transfer table with smooth edges. Accepts standard LEWCO SPM and SPH series supports.

Download PDF

WIDTH: 12″ – 50″
LENGTH: 12″ – 120″
BALL CENTERS: 1-1/2” (staggered only), 2″, 3″, 4″, 6″
BALL TRANSFER: Standard 1″ diameter steel ball transfer with 1/4-20 UNC stud mount. Optional ball transfers include stainless steel surface, nylon surface and steel surface with flange.
BALL COVER: Standard is no ball cover. Optional ball cover available.
FRAME: Standard 12ga formed steel plate with angle stiffeners located on nominal 12″centers and on both ends.
MOUNTING: Standard 7/16″ mounting holes on both ends.
SUPPORTS: SPM, SPH and SPS supports available.
GUARDRAIL: Standard is no guardrail. Optional 12ga formed steel angle side and end guardrails. 2″, 3″, 4″ height. Available one side or both sides.
FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors include green, beige, gray, orange, black and yellow.

The BPC style ball table is built as a complete section that can be utilized as a free standing unit or coupled to existing sections of gravity roller conveyor and are typically used as transition or positioning areas within the line. The frames are designed to accept standard LEWCO supports.

Download PDF

WIDTH: 9″ – 51″
LENGTH: 18″ – 120″
BALL CENTERS: 1-1/2” (staggered only), 2″, 3″, 4″, 6″
BALL TRANSFER: Standard 1″ diameter steel ball transfer with 1/4-20 UNC stud mount. Optional ball transfers include stainless steel surface, nylon surface, and steel surface with flange.
BALL COVER: Standard is no ball cover. Optional ball cover available.
FRAME: Standard 12ga formed steel channel rails with 12ga formed pans.
COUPLING: Standard bolted butt couplers on both ends of channel.
SUPPORTS: SPM, SPH and SPS supports available.
GUARDRAIL: Standard is no guardrail. Optional 12ga formed steel channel side guardrails. 2″, 4″, 6″, 8″, 12″ height. Available one side or both sides.
FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors include green, beige, gray, orange, black and yellow.

BPD plates are designed to replace rollers in existing sections of gravity roller conveyor and are typically used as transition or positioning areas within the line.

Download PDF

WIDTH: 9″ – 51″
LENGTH: 2″, 6″, 9″, 12″
BALL CENTERS: 1-1/2” (staggered only), 2″, 3″, 4″, 6″
BALL TRANSFER: Standard 1″ diameter steel ball transfer with 1/4-20 UNC stud mount. Optional ball transfers include stainless steel surface, nylon surface, and steel surface with flange.
BALL COVER: Standard is no ball cover. Optional ball cover available.
FRAME: Standard 12ga formed steel plate with 7/16″ holes for attaching to rails.
GUARDRAIL: Standard is no guardrail. Optional side and end guardrails are available on one side or both sides.
FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors include green, beige, gray, orange, black and yellow.