Turntable


Turntable



Turntables provide a method of rotating unit loads when material lines intersect or change directions. Unlike Chain Transfer Devices, they maintain product orientation through an intersection. They can also be used to reverse the orientation of a product or allow a pass through depending on application requirements. When used in a system, they will typically slow through put and require more complex controls to ensure safety because for the rotating top assembly.

If you have any questions about turntables, simply call us at (724) 969-1188 or use our online contact form.

Models of Turntables



LPT – LOW PROFILE TURNTABLE

LPT_LargeModel LPT is a heavy duty turntable that can be used for loading or unloading pallets, tote pans and boxes. In assembly or repair operations it provides convenient access to all sides of the equipment.

LPT PDF Download

LPT SPECIFICATIONS:

• DIAMETER: 36″, 42″, 48″
• ELEVATION: 4″ – 9.75″
• ROTATION: 360 degrees, detented at 90 degree increments.
• TURNTABLE PLATE: Standard is 3/8″ plate, with slewing ring center bearing.
• FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors include green, beige, gray, orange, black and yellow.

LPTG19 – LOW PROFILE TURNTABLE WITH 1900 SERIES GRAVITY CONVEYOR

LPTG19_LargeModel LPTG is a heavy duty turntable featuring a 1912 gravity roller top and concave transition sections (2 included) that can be used in a pass thru conveyor line. The transition section can be reconfigured to make 90° turns at the intersection of two gravity conveyor lines.

LPTG19 PDF Download

LPTG19 SPECIFICATIONS:

• BETWEEN FRAMES: 27″ and 33″
• ELEVATION: 8.25″ – 12.75″
• ROTATION: 360 degrees, detented at 90 degree increments.
• ROLLER CENTERS: 4″
• ROLLERS: 1.9” diameter, 12ga wall tube with precision, grease packed bearings or 9ga wall tube with semi-precision grease packed bearings. All rollers with 7/16” hex cold rolled steel axles, spring retained.
• TURNTABLE PLATE: Standard is 3/8″ plate, with slewing ring center bearing.
• ROLL COVERS: Optional orange polyurethane, 1/8″ wall or galvanized tube for 12 ga rollers.
• TRANSITION ROLLERS: Standard set for pass through conveyor line. Optional transition section can be configured for 90 turns.
• FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors include green, beige, gray, orange, black and yellow.

LPTG25 – LOW PROFILE TURNTABLE WITH 2500 SERIES GRAVITY CONVEYOR

LPTG25_LargeModel LPTG25 heavy duty turntable featuring a 2511 gravity roller top and concave transition sections (2 included) that can be used in a pass thru conveyor line. The transition section can be reconfigured to make 90° turns at the intersection of two gravity conveyor lines.

LPTG25 PDF Download

LPTG25 SPECIFICATIONS:

• BETWEEN FRAMES: 27″ and 33″
• ELEVATION: 8.25″ – 12.75″
• ROTATION: 360 degrees, detented at 90 degree increments.
• ROLLER CENTERS: 4-1/2″
• ROLLERS: 2.5” diameter, 11ga wall tube or 2.625 diameter, 7 ga wall tube. All rollers with 11/16” hex cold rolled steel axles, spring retained. Standard bearings are precision, grease packed.
• TURNTABLE PLATE: Standard is 3/8″ plate, with slewing ring center bearing.
• ROLL COVERS: Optional orange polyurethane, 1/8″ wall or galvanized tube for 11 ga rollers.
• TRANSITION ROLLERS: Standard set for pass through conveyor line. Optional transition section can be configured for 90 turns.
• FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors include green, beige, gray, orange, black and yellow.

NPT – NON-POWERED TURNTABLE

NPT-LargeThe Model NPT Turntable can be used for loading or unloading pallets, tote pans and boxes. Hand operated, it turns easily to provide convenient access to all sides of the equipment.

NPT PDF Download

NPT SPECIFICATIONS:

• DIAMETER: 36″, 42″, 48″, 54″, 60″, 72″
• ELEVATION: 10.0″ – 36.0″
• ROTATION: 360 degrees with spring loaded detents at 90 degree increments.
• TURNTABLE PLATE: Standard is 1/2″ plate with slewing ring center bearing.
• FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors include green, beige, gray, orange, black and yellow.

NPTG19 – Non-Powered Turntable with 1900 Series Gravity Conveyor

NPTG19-LargeModel NPTG19 non-powered gravity conveyor turntable provides a transition that can be used in a pass thru conveyor line. The transition section can be reconfigured to make 90° turns at the intersection of two gravity conveyor lines.

NPTG19 PDF Download

NPTG19 SPECIFICATIONS:

• BETWEEN FRAMES: 27″, 33″, 39″, 45″, 51″, 55″, 57″, 61″
• ELEVATION: 13.0″ – 36.0″
• ROTATION: 360 degrees with spring loaded detents at 90 degree increments.
• ROLLER CENTERS: 4-1/2″
• ROLLERS: 2.5” diameter, 11ga wall tube or 2.625″ diameter, 7ga wall tube. All rollers with 11/16” hex cold rolled steel axles, spring retained. Standard bearings are precision, grease packed.
• TURNTABLE PLATE: Standard is 1/2″ plate with slewing ring center bearing.
• ROLL COVERS: Optional orange polyurethane, 1/8″ wall or galvanized tube for 2.5″ diameter roller.
• TRANSITION ROLLERS: Standard set for pass through conveyor line. Optional transition section can be configured for 90 turns.
• FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors include green, beige, gray, orange, black and yellow.

NPTG25 – NON-POWERED TURNTABLE WITH 2500 SERIES GRAVITY CONVEYOR

NPTG25-LargeModel NPTG25 non-powered gravity conveyor turntable provides a transition that can be used in a pass thru conveyor line. The transition section can be reconfigured to make 90° turns at the intersection of two gravity conveyor lines.

NPTG25 PDF Download

NPTG25 SPECIFICATIONS:

• BETWEEN FRAMES: 27″, 33″, 39″, 45″, 51″, 55″, 57″, 61″
• ELEVATION: 13.0″ – 36.0″
• ROTATION: 360 degrees with spring loaded detents at 90 degree increments.
• ROLLER CENTERS: 4-1/2″
• ROLLERS: 2.5” diameter, 11ga wall tube or 2.625″ diameter, 7ga wall tube. All rollers with 11/16” hex cold rolled steel axles, spring retained. Standard bearings are precision, grease packed.
• TURNTABLE PLATE: Standard is 1/2″ plate with slewing ring center bearing.
• ROLL COVERS: Optional orange polyurethane, 1/8″ wall or galvanized tube for 2.5″ diameter roller.
• TRANSITION ROLLERS: Standard set for pass through conveyor line. Optional transition section can be configured for 90 turns.
• FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors include green, beige, gray, orange, black and yellow.

PP360 – 360 DEGREE ROTATING TURNTABLE

PP360-LargeThe Model PP360 Turntable features full 360° powered rotation. This unit is ideal for heavy duty applications requiring powered versus manual rotation. The PP360 can be fitted with various styles of powered conveyor such a multi-strand chain or chain driven live roller to convey material on and off of the turntable.

PP360 PDF Download

PP360 SPECIFICATIONS:

• EFFECTIVE WIDTH: All rollers: 24″, 30″, 36″, 42″, 48″; for 2.5″ and 2.625″ diameter rollers: 51″, 54″, 60.
• ELEVATION: 12″ – 48″
• SPEED: 1.9″ diameter roller: 10 – 100FPM. 2.5″and 2.625″ diameter roller: 10 – 150 FPM
• ROTATION: Standard 360 degrees. Optional indexing available for 90deg, 180deg and 270deg.
• ROLLER CENTERS: 4″ for 1.9″ diameter rollers. 4-1/2″ for 2.5″ and 2.625″ diameter rollers.
• ROLLERS: 1.9” diameter rollers have 7/16″ hex cold rolled steel axles, spring retained. Either 12ga wall tube with precision grease packed bearings or 9ga wall tube with semi-precision grease packed bearings. 2.5″ diameter rollers, 11ga wall tube and 2.625″ diameter, 7ga wall tube are available with 11/16″ hex cold rolled steel axles, spring retained and precision grease packed bearings.
• TURNTABLE PLATE: Standard is 3/8″ plate with slewing ring center bearing.
• MOTOR: 1/2 HP through 2 HP. Energy efficient, inverter duty, and brake motors also available. Voltages include 115/1/60, 208/3/60, 230/3/60, 460/3/60 and 575/3/60 & DC Voltage.
• ROLLER SURFACE: Standard carbon steel. Optional orange polyurethane, 1/8″ wall for 1.9″ diameter, 12ga; 1.9″ diameter, 9ga; and 2.5″ diameter, 11ga. Optional galvanized for 1.9″ diameter, 12ga and 2.5″ diameter, 11ga.
• FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors include green, beige, gray, orange, black and yellow.

PP90 – TURNTABLE, 90 DEGREE ROTATE, AIR CYLINDER

PP90-LargeThe Model PP90 Turntable features full 90° powered rotation. This unit is ideal for heavy duty applications requiring powered versus manual rotation. The PP90 can be fitted with various styles of powered conveyor such a multi-strand chain or chain driven live roller to convey material on and off of the turntable.

PP90 PDF Download

PP90 SPECIFICATIONS:

• EFFECTIVE WIDTH: All rollers: 24″, 30″, 36″, 42″, 48″; for 2.5″ and 2.625″ diameter rollers: 51″, 54″, 60.
• ELEVATION: 16″ – 48″
• SPEED: 1.9″ diameter roller: 10 – 100FPM. 2.5″and 2.625″ diameter roller: 10 – 150 FPM
• ROTATION: Standard 90 degree. Pneumatically driven. Hard stop.
• ROLLER CENTERS: 4″ for 1.9″ diameter rollers. 4-1/2″ for 2.5″ and 2.625″ diameter rollers.
• ROLLERS: 1.9” diameter rollers have 7/16″ hex cold rolled steel axles, spring retained. Either 12ga wall tube with precision grease packed bearings or 9ga wall tube with semi-precision grease packed bearings. 2.5″ diameter rollers, 11ga wall tube and 2.625″ diameter, 7ga wall tube are available with 11/16″ hex cold rolled steel axles, spring retained and precision grease packed bearings.
• TURNTABLE PLATE: Standard is 3/8″ plate with slewing ring center bearing.
• MOTOR: 1/2 HP through 2 HP. Energy efficient, inverter duty, and brake motors also available. Voltages include 115/1/60, 208/3/60, 230/3/60, 460/3/60 and 575/3/60 & DC Voltage.
• AIR REQUIREMENTS: Requires 40PSI air pressure of clean, filtered air at consumption of approximately 0.05 cubic feet per 90 degree rotation.
• FILTER REGULATOR: Supplied for main air supply at input, 3/8″ NPT port.
• ELECTRICAL REQUIREMENTS: Includes home and 90 degree position proximity switches, 20 to 250 volt AC/DC, prewired and terminated in 6″ square junction box on outside of turntable frame. Photo-eye sensor available as option for product detection.
• ROLLER SURFACE: Standard carbon steel. Optional orange polyurethane, 1/8″ wall for 1.9″ diameter, 12ga; 1.9″ diameter, 9ga; and 2.5″ diameter, 11ga. Optional galvanized for 1.9″ diameter, 12ga and 2.5″ diameter, 11ga.
• FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors include green, beige, gray, orange, black and yellow.

If you have any questions about the models of turntables on this page, please call us at (724) 969-1188 or use our online contact form. We’ll help you identify the best solution that fits your project needs—as well as your budget.

–Jim & Ben Heinrich