Hinged Steel Belt Conveyors



There are several basic configurations for the rugged and long-lasting Steel Hinge Belt Conveyor.

These steel hinged belt conveyors are typically used in rugged applications, such as handling scrap metal, metal chips, stampings, forgings, fasteners, turnings, die cast parts and castings.

The design of the unit allows these steel hinge belt conveyors to operat6e continuously, whether it’s an incline, decline or level. This flexibility minimizes downtime even in the most demanding wet or dry conditions.

Hinged steel belt conveyors are designed for maximal lifetime and minimal service requirements. The steel belt conveyor has a flexible design to meet the most diverse installation layouts.

The hinged steel belt design has robotic welded plates for long life. The hinged steel belt conveyor has a robust design of both belt and trough to cope with tough applications.

The three basics models of hinged steel belt conveyors follow. Each belt conveyor type has a PDF schematic for download.

Questions about hinged steel belt conveyors? Simply call us at (724) 969-1188 or use our online contact form.

Models of Hinged Steel Belt Conveyors



SHBHSHBH – Steel Hinged Belt Conveyor, Horizontal

Steel Hinge Belt Conveyors are available in a variety of configurations (Z, L, P, H) and with a variety of incline angles. Designed for heavy duty use, they are typically configured for use in machining or stamping applications for part or scrap removal.

SHBH PDF Download

SHBH SPECIFICATIONS:

• BELT WIDTH: 8″ – 36″
• LENGTH OF INCLINE: 52″ – 324″
• BEGINNING ELEVATION: 8″ – 48″
• ENDING ELEVATION: 36″ – 126″
• SPEED: 10 – 45 FPM
• INCLINED ANGLE: 30°, 45°, 60°
• FEEDER LENGTH: 12″ – 120″
• NOSEOVER LENGTH: 15″ – 120″
• BELT: Standard is 2-1/2” pitch steel hinge, dimpled, standard chain with outer side bars. Optional belts are dimpled or perforated, with or without outer side bars. Optional 1-1/2” steel cleats at various center distances are available.
• DRIVE: Standard drive is end drive, overhead, right hand side.
• MOTOR: 1/2 HP through 1 HP. Energy efficient, inverter duty and brake motors also available. Voltages include 120/1/60, 230/3/60, 460/3/60 and 575/3/60 & DC Voltage.
• SUPPORT CENTERS: Standard supports are on nominal 10’ centers.
• FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors include green, beige, gray, orange, black and yellow.

SHBLSHBL – Steel Hinged Belt Conveyor L Shape

Steel Hinge Belt Conveyors are available in a variety of configurations (Z, L, P, H) and with a variety of incline angles. Designed for heavy duty use, they are typically configured for use in machining or stamping applications for part or scrap removal.

SHBL PDF Download

SHBL SPECIFICATIONS:

• BELT WIDTH: 8″ – 36″
• LENGTH OF INCLINE: 52″ – 324″
• BEGINNING ELEVATION: 8″ – 48″
• ENDING ELEVATION: 36″ – 126″
• SPEED: 10 – 45 FPM
• INCLINED ANGLE: 30°, 45°, 60°
• FEEDER LENGTH: 12″ – 120″
• NOSEOVER LENGTH: 15″ – 120″
• BELT: Standard is 2-1/2” pitch steel hinge, dimpled, standard chain with outer side bars. Optional belts are dimpled or perforated, with or without outer side bars. Optional 1-1/2” steel cleats at various center distances are available.
• DRIVE: Standard drive is end drive, overhead, right hand side.
• MOTOR: 1/2 HP through 1 HP. Energy efficient, inverter duty and brake motors also available. Voltages include 120/1/60, 230/3/60, 460/3/60 and 575/3/60 & DC Voltage.
• SUPPORT CENTERS: Standard supports are on nominal 10’ centers.
• FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors include green, beige, gray, orange, black and yellow.

SHBZSHBZ – Steel Hinged Belt Conveyor Z Shape

Steel Hinge Belt Conveyors are available in a variety of configurations (Z, L, P, H) and with a variety of incline angles. Designed for heavy duty use, they are typically configured for use in machining or stamping applications for part or scrap removal.

SHBZ PDF Download

SHBZ SPECIFICATIONS:

• BELT WIDTH: 8″ – 36″
• LENGTH OF INCLINE: 52″ – 324″
• BEGINNING ELEVATION: 8″ – 48″
• ENDING ELEVATION: 36″ – 126″
• SPEED: 10 – 45 FPM
• INCLINED ANGLE: 30°, 45°, 60°
• FEEDER LENGTH: 12″ – 120″
• NOSEOVER LENGTH: 15″ – 120″
• BELT: Standard is 2-1/2” pitch steel hinge, dimpled, standard chain with outer side bars. Optional belts are dimpled or perforated, with or without outer side bars. Optional 1-1/2” steel cleats at various center distances are available.
• DRIVE: Standard drive is end drive, overhead, right hand side.
• MOTOR: 1/2 HP through 1 HP. Energy efficient, inverter duty and brake motors also available. Voltages include 120/1/60, 230/3/60, 460/3/60 and 575/3/60 & DC Voltage.
• SUPPORT CENTERS: Standard supports are on nominal 10’ centers.
• FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors include green, beige, gray, orange, black and yellow.

Which type of hinged steel belt conveyor is right for you? We can help you determine the best model. Call us at (724) 969-1188, or use our online contact form. Either way, we’ll work with you to identify the best solution that fits your project needs and budget.

–Jim & Ben Heinrich