Non-powered roller conveyors—commonly called “Gravity Conveyors”—are the least expensive as well as most common method of moving product.
The conveyors are typically mounted on a slight decline angle, using good old-fashioned gravity to assist product movement, especially over long distances. Gravity conveyors can also be used in applications where the conveyor is level and operators can push the product along to its final destination, allowing for multiple workstations, if necessary.
This document provides the basics on the different models of gravity conveyors. Each conveyor type has a convenient PDF schematic for download.
Questions about gravity roller conveyors? We’re just a call away—(724) 969-1188. Or you can use our online contact form to reach us day or night.

–Jim & Ben Heinrich

Models of Gravity Roller Conveyors

 

14181418 – Straight Roller Conveyor with 1.38″ Diameter, 18 ga. Rollers

1-3/8 in. Dia. gravity roller conveyor is used to carry lightweight packages. This light duty conveyor easily flows product with minimal slope, and is useful when portability is required.

1418 SPECIFICATIONS

• BETWEEN FRAMES: 6″ – 22″
• LENGTH: 18″ – 120″
• ROLLER CENTERS: 1.5″, 3″, 4.5″, 6″, 9″, 12″
• ROLLERS: 1.375″ dia., 18 ga. wall galvanized tubes with 1/4″ round cold rolled
steel axles, spring retained. Standard A02 bearings are light oil lubricated. 50 lbs.
roller capacity.
• FRAMES: Standard F98 set high 2-1/2″ x 1″ x 12ga formed steel channel with
bolted 1-1/8″ x 1/8″ angle crossties.
• ROLLER SURFACE: Standard galvanized tube. Optional roll covers includes
Orange Polyurethane, 1/8″ wall.
• COUPLINGS: 3/8” diameter rod on one end, mating hooks on opposite end.
Optional coupling is strap, butt coupler, or no couplings.
• FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors
include green, beige, gray, orange, black and yellow.
>> View PDF schematic of Model 1418

19161916 – Straight Roller Conveyor with 1.9″ Diameter, 16 ga. Rollers

1.9″ Diameter 16 ga. Gravity Roller Conveyors are ideal for applications that require an economical, non-powered means for conveying material. This medium duty conveyor easily flows product with minimal slope and is used to convey a wide array of products and packages.

1916 SPECIFICATIONS

• BETWEEN FRAMES: 6″ – 51″
• LENGTH: 18″ – 120″
• ROLLER CENTERS: 2.25″, 3″, 4.5″, 6″, 9″, 12″
• ROLLERS: 1909 Roller – 9ga wall tube. 1912 Roller – 12ga wall tube. 1916 Roller –
16ga wall tube. All rollers 1.9″ dia., with 7/16″ hex cold rolled steel axles, spring
retained. Standard bearings are light oil lubricated. Optional bearings include
combinations of precision, semi-precision, and non-precision construction with
light oil or grease packed lubrication.
• FRAMES: Standard F97 set high 3-1/2″ x 1-1/2″ x 12ga formed steel channel with
bolted 2″ x 8ga galvanized angle crossties.
• ROLL COVERS: Optional Orange Polyurethane, 1/8″ wall or galvanized tube for
1912, 1916.
• COUPLINGS: Bolted butt couplers standard on both ends of channel.
• FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors
include green, beige, gray, orange, black and yellow.
>> View PDF schematic of Model 1916

19121912 – Straight Roller Conveyor with 1.9″ Diameter, 12 ga. Rollers

1.9″ Diameter 12 ga. Gravity Roller Conveyors are ideal for applications that require an economical, non-powered means for conveying material. The 1912 roller in this conveyor is a sturdy roller that is a step up in robustness compared to a 1916 roller.

1912 SPECIFICATIONS

• BETWEEN FRAMES: 6″ – 51″
• LENGTH: 18″ – 120″
• ROLLER CENTERS: 2.25″, 3″, 4.5″, 6″, 9″, 12″
• ROLLERS: 1909 Roller – 9ga wall tube. 1912 Roller – 12ga wall tube. 1916 Roller –
16ga wall tube. All rollers 1.9″ dia., with 7/16″ hex cold rolled steel axles, spring
retained. Standard bearings are light oil lubricated. Optional bearings include
combinations of precision, semi-precision, and non-precision construction with
light oil or grease packed lubrication.
• FRAMES: Standard F97 set high 3-1/2″ x 1-1/2″ x 12ga formed steel channel with
bolted 2″ x 8ga galvanized angle crossties.
• ROLL COVERS: Optional Orange Polyurethane, 1/8″ wall or galvanized tube for
1912, 1916.
• COUPLINGS: Bolted butt couplers standard on both ends of channel.
• FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors
include green, beige, gray, orange, black and yellow.
>> View PDF schematic of Model 1912

1909

1909 – Straight Roller Conveyor with 1.9″ Diameter, 9 ga. Rollers

1.9″ Diameter 9 ga. Gravity Roller Conveyors are ideal for applications that require an economical, non-powered means for conveying material. The 1909 roller in this conveyor has a heavier wall thickness and is suitable for moderately heavier applications than it’s 1912 cousin.

1909 SPECIFICATIONS

• BETWEEN FRAMES: 6″ – 51″
• LENGTH: 18″ – 120″
• ROLLER CENTERS: 2.25″, 3″, 4.5″, 6″, 9″, 12″
• ROLLERS: 1909 Roller – 9ga wall tube. 1912 Roller – 12ga wall tube. 1916 Roller –
16ga wall tube. All rollers 1.9″ dia., with 7/16″ hex cold rolled steel axles, spring
retained. Standard bearings are light oil lubricated. Optional bearings include
combinations of precision, semi-precision, and non-precision construction with
light oil or grease packed lubrication.
• FRAMES: Standard F97 set high 3-1/2″ x 1-1/2″ x 12ga formed steel channel with
bolted 2″ x 8ga galvanized angle crossties.
• ROLL COVERS: Optional Orange Polyurethane, 1/8″ wall or galvanized tube for
1912, 1916.
• COUPLINGS: Bolted butt couplers standard on both ends of channel.
• FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors
include green, beige, gray, orange, black and yellow.
>> View PDF schematic of Model 1909

25142514 – Straight Roller Conveyor with 2.5″ Diameter, 14 ga. Rollers

2.5″ O.D. x 14 ga. Gravity Roller Conveyors are ideal for applications that require an economical, non-powered means for conveying material. This conveyor is used for handling medium weight pallets, drums, and containers.

2514 SPECIFICATIONS

• BETWEEN FRAMES: 6″ – 51″
• LENGTH: 18″ – 120″
• ROLLER CENTERS: 3″, 4.5″, 6″, 9″, 12″
• ROLLERS: 2.5″ dia., 14ga wall tubes with 7/16″ hex cold rolled steel axles, spring
retained. Standard A40 bearings are light oil lubricated. Optional A41 bearings are
greased. 290 lbs roller capacity.
• FRAMES: Standard F97 set high 3-1/2″ x 1-1/2″ x 12ga formed steel channel with
bolted 2″ x 8ga galvanized angle crossties.
• ROLLER SURFACE: Optional Orange Polyurethane, 1/8″ wall.
• COUPLINGS: Bolted butt couplers Standard on both ends of channel.
• FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors
include green, beige, gray, orange, black and yellow.
>> View PDF schematic of Model 2514

25112511 – Straight Roller Conveyor with 2.5″ Diameter, 11 ga. Rollers

2.5″ Diameter 11 ga. Gravity Roller Conveyors are ideal for applications that require an economical, non-powered means for conveying material. This heavy duty conveyor is used for handling full pallets, drums, and containers.

2511 SPECIFICATIONS

• BETWEEN FRAMES: 6″ – 61″
• LENGTH: 18″ – 120″
• ROLLER CENTERS: 3″, 4.5″, 6″, 9″, 12″
• ROLLERS: 2511 Roller – 2.5″ dia., 11ga wall tubes. 2607 Roller – 2.625″ dia., 7ga
wall tubes. Both rollers with 11/16″ hex cold rolled steel axle, spring retained.
Standard A6204 bearings are light oil lubricated. Optional bearings include
combinations of precision, semi-precision and non-precision construction with
light oil or grease packed lubrication. 750 lbs roller capacity.
• FRAMES: Standard F96 set high 4″ x 1-1/2″ x 8ga formed steel channel with
bolted 2″ x 8ga galvanized angle crossties.
• ROLL COVERS: Optional Orange Polyurethane, 1/8″ wall or galvanized tube.
• COUPLINGS: Bolted butt couplers standard on both ends of channel.
• FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors
include green, beige, gray, orange, black and yellow.
>> View PDF schematic of Model 2511

26072607 – Straight Roller Conveyor with 2.62″ Diameter, 7 ga. Rollers

2-5/8″ Diameter, 7 ga. Gravity Roller Conveyors are ideal for applications that require an economical, non-powered means for conveying material. This heavy duty conveyor is used for handling full pallets, drums, and containers. The heavy wall rollers are an excellent choice for impact zones or fork truck load/unload stations.

2607 SPECIFICATIONS

• BETWEEN FRAMES: 6″ – 61″
• LENGTH: 18″ – 120″
• ROLLER CENTERS: 3″, 4.5″, 6″, 9″, 12″
• ROLLERS: 2511 Roller – 2.5″ dia., 11ga wall tubes. 2607 Roller – 2.625″ dia., 7ga
wall tubes. Both rollers with 11/16″ hex cold rolled steel axle, spring retained.
Standard A6204 bearings are light oil lubricated. Optional bearings include
combinations of precision, semi-precision and non-precision construction with
light oil or grease packed lubrication. 750 lbs roller capacity.
• FRAMES: Standard F96 set high 4″ x 1-1/2″ x 8ga formed steel channel with
bolted 2″ x 8ga galvanized angle crossties.
• ROLL COVERS: Optional Orange Polyurethane, 1/8″ wall or galvanized tube.
• COUPLINGS: Bolted butt couplers standard on both ends of channel.
• FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors
include green, beige, gray, orange, black and yellow.
>> View PDF schematic of Model 2607

35093509 – Straight Roller Conveyor with 3.50″ Diameter, 9 ga. Rollers

3.5″ Diameter, 9 ga. Gravity Roller Conveyors are ideal for applications that require an economical, non-powered means for conveying material. This heavy duty conveyor is used for handling full pallets, drums, and containers.

3509 SPECIFICATIONS

• BETWEEN FRAMES: 12″ – 61″
• LENGTH: 18″ – 120″
• ROLLER CENTERS: 4″, 6″, 8″, 12″
• ROLLERS: 3.5″ dia., 9ga wall tubes with 11/16″ hex cold rolled steel axles, spring
retained. Standard A70 bearings are grease lubricated. 750 lbs roller capacity.
FRAMES: Standard F94 set high 4@5.4# structural steel channel with welded 2″ x
4ga angle crossties.
• ROLLER SURFACE: Optional Orange Polyurethane, 1/8” wall.
• COUPLINGS: Welded 1/4″ plate butt couplers standard on both ends of channel.
• FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors
include green, beige, gray, orange, black and yellow.
>> View PDF schematic of Model 3509

35303530 – Straight Roller Conveyor with 3.50″ Diameter, .300 wall Rollers

3.5″ Diameter, .300 Wall Gravity Roller Conveyors are ideal for applications that require an economical, non-powered means for conveying material. This heavy duty conveyor is used for handling full pallets, drums, and containers. The 3-1/2″ o.d. x .300 wall, high capacity rollers, and standard structural channel frames, are suitable for heavy loads, and the most abusive industrial applications around.

3530 SPECIFICATIONS

• BETWEEN FRAMES: 6″ – 90″
• LENGTH: 18″ – 120″
• ROLLER CENTERS: 4″, 6″, 8″, 12″, 24″
• ROLLERS: 3.5″ dia., .300″ wall tubes with 1″ hex cold rolled steel axles, cotter pin
retained. Standard A80 bearings are grease lubricated. Double Shielded. 2000 lbs
roller capacity.
• FRAMES: Standard F95 set high 5@6.7# structural steel channel with welded 2″ x
1/4″ angle crossties.
• ROLLER SURFACE: Optional Orange Polyurethane, 1/8” wall.
• COUPLINGS: Welded 1/4″ plate butt couplers standard on both ends of channel.
• FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors
include green, beige, gray, orange, black and yellow.
>> View PDF schematic of Model 3530

1418C1418C – Curve Roller Conveyor with 1.38″ Diameter, 18 ga. Rollers

1-3/8 in. Dia. gravity roller Curves are used to provide smooth product flow on light weight packages through turns. Curves will convey products with minimum degree of pitch based on weight and size. Optional guard rails may be added for product protection.

1418C SPECIFICATIONS

• BETWEEN FRAMES: 10″, 13″, 16″, 22″
• DEGREE: 90 , 45 , 30
• ROLLERS: 1.375″ dia., 18ga wall galvanized tubes with 1/4″ round cold rolled
steel axles, spring retained. Standard A02 bearings are light oil lubricated. 50 lbs
roller capacity.
• FRAMES: Standard FC98 set high 2-1/2″ x 1″ x 12ga formed steel channel with
bolted 1-1/8″ x 1/8″ angle crossties. Optional FC33 set low 3-1/2″ x 1″ x 12ga.
• ROLLER SURFACE: Standard galvanized tube. Optional roll covers includes
Orange Polyurethane, 1/8″ wall.
• COUPLINGS: 3/8″ diameter rod on one end, mating hooks on opposite end.
Optional coupling is strap, butt coupler, or no coupling.
• FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors
include green, beige, gray, orange, black and yellow.
>> View PDF schematic of Model 1418C

1916C1916C – Curve Roller Conveyor with 1.90″ Diameter, 16 ga. Rollers

1.9″ Diameter 16 ga. Gravity Roller Curves are used to provide smooth product flow through turns. Curves will convey products with minimum degree of pitch based on weight and size. Optional guard rails may be added for product protection.

1916C SPECIFICATIONS

• BETWEEN FRAMES: 6″ – 51″
• DEGREE: 90 , 45 , 30
• ROLLERS: 1909 Roller – 9ga wall tube. 1912 Roller – 12ga wall tube. 1916 Roller –
16ga wall tube. All rollers 1.9″ dia., with 7/16″ hex cold rolled steel axles, spring
retained. Standard bearings are light oil lubricated. Optional bearings include combinations of precision, semi-precision, and non-precision construction with
light oil or grease packed lubrication.
• FRAMES: Standard FC97 set high 3-1/2″ x 1-1/2″ x 12ga formed steel channel
with bolted 2″ x 8ga galvanized angle crossties. Optional frame include FC38
channel, 4-1/2” x 1-1/2” x 12ga set low.
• ROLLER SURFACE: Optional Orange Polyurethane, 1/8″ wall or galvanized tube.
• COUPLINGS: Bolted butt couplers standard on both ends of channel.
• FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors
include green, beige, gray, orange, black and yellow.
>> View PDF schematic of Model 1916C

1912C1912C – Curve Roller Conveyor with 1.90″ Diameter, 12 ga. Rollers

1.9″ Diameter 12 ga. Gravity Roller Curves are used to provide smooth product flow through turns. Curves will convey products with minimum degree of pitch based on weight and size. Optional guard rails may be added for product protection. The 1912 roller in this conveyor is a sturdy roller that is a step up in robustness compared to a 1916 roller.

1912C SPECIFICATIONS

• BETWEEN FRAMES: 6″ – 51″
• DEGREE: 90 , 45 , 30
• ROLLERS: 1909 Roller – 9ga wall tube. 1912 Roller – 12ga wall tube. 1916 Roller –
16ga wall tube. All rollers 1.9″ dia., with 7/16″ hex cold rolled steel axles, spring
retained. Standard bearings are light oil lubricated. Optional bearings include
combinations of precision, semi-precision, and non-precision construction with
light oil or grease packed lubrication.
• FRAMES: Standard FC97 set high 3-1/2″ x 1-1/2″ x 12ga formed steel channel
with bolted 2″ x 8ga galvanized angle crossties. Optional frame include FC38
channel, 4-1/2” x 1-1/2” x 12ga set low.
• ROLLER SURFACE: Optional Orange Polyurethane, 1/8″ wall or galvanized tube.
• COUPLINGS: Bolted butt couplers standard on both ends of channel.
• FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors
include green, beige, gray, orange, black and yellow.
>> View PDF schematic of Model 1912C

1909C1909C – Curve Roller Conveyor with 1.90″ Diameter, 9 ga. Rollers

1.9″ Diameter 9 ga. Gravity Roller Curves are used to provide smooth product flow through turns. Curves will convey products with minimum degree of pitch based on weight and size. Optional guard rails may be added for product protection. The 1909 roller in this conveyor has a heavier wall thickness and is suitable for moderately heavier applications than its 1912 cousin.

1909C SPECIFICATIONS

• BETWEEN FRAMES: 6″ – 51″
• DEGREE: 90 , 45 , 30
• ROLLERS: 1909 Roller – 9ga wall tube. 1912 Roller – 12ga wall tube. 1916 Roller –
16ga wall tube. All rollers 1.9″ dia., with 7/16″ hex cold rolled steel axles, spring
retained. Standard bearings are light oil lubricated. Optional bearings include
combinations of precision, semi-precision, and non-precision construction with
light oil or grease packed lubrication.
• FRAMES: Standard FC97 set high 3-1/2″ x 1-1/2″ x 12ga formed steel channel
with bolted 2″ x 8ga galvanized angle crossties. Optional frame include FC38
channel, 4-1/2” x 1-1/2” x 12ga set low.
• ROLLER SURFACE: Optional Orange Polyurethane, 1/8″ wall or galvanized tube.
• COUPLINGS: Bolted butt couplers standard on both ends of channel.
• FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors
include green, beige, gray, orange, black and yellow.
>> View PDF schematic of Model 1909C

2514C2514C – Curve Roller Conveyor with 2.50″ Diameter, 14 ga. Rollers

2.5″ O.D. x 14 ga. Gravity Roller Curves are used to provide smooth product flow through turns. Curves will convey products with minimum degree of pitch based on weight and size. Optional guard rails may be added for product protection.

2514C SPECIFICATIONS

• BETWEEN FRAMES: 6″ – 51″
• DEGREE: 90 , 45 , 30
• ROLLERS: 2.5″ dia., 14ga wall tubes with 7/16″ hex cold rolled steel axle, spring
retained. Standard A40 bearings are light oil lubricated. Optional A41 bearings are
greased. 290 lbs roller capacity.
• FRAMES: Standard FC97 set high 3-1/2″ x 1-1/2″ x 12ga formed steel channel
with bolted 2″ x 8ga galvanized angle crossties. Optional frame include FC38
channel, 4-1/2″ x 1-1/2″ x 12ga set low.
• ROLLER SURFACE: Optional Orange Polyurethane, 1/8″ wall.
• COUPLINGS: Bolted butt couplers Standard on both ends of channel.
• FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors
include green, beige, gray, orange, black and yellow.
>> View PDF schematic of Model 2514C

2511C2511C – Curve Roller Conveyor with 2.50″ Diameter, 11 ga. Rollers

2.5″ Diameter 11 ga. Gravity Roller Curves are used to provide smooth product flow through turns. Curves will convey products with minimum degree of pitch based on weight and size. Optional guard rails may be added for product protection.

2511C SPECIFICATIONS

• BETWEEN FRAMES: 6″ – 61″
• DEGREE: 90 , 45 , 30
• ROLLERS: 2511 Roller – 2.5″ dia., 11ga wall tubes. 2607 Roller – 2.625″ dia., 7ga
wall tubes. Both rollers have 11/16″ hex cold rolled steel axle, spring retained.
Standard A50 bearings are light oil lubricated. Optional bearings include
combinations of precision, semi-precision and non-precision construction with
light oil or grease packed lubrication. 750 lbs roller capacity.
• FRAMES: Standard FC96 set high 4″ x 1-1/2″ x 8ga formed steel channel with
bolted 2″ x 8ga galvanized angle crossties. Optional frames include FC19 channel
5″ & 4″ x 1-1/2″ x 8ga set high and low or FC39 channel 5” x 1-1/2” x 8ga set low.
• ROLLER SURFACE: Optional Orange Polyurethane, 1/8″ wall or galvanized tube.
(2511 ONLY)
• COUPLINGS: Bolted butt couplers standard on both ends of channel.
• FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors
include green, beige, gray, orange, black and yellow.
>> View PDF schematic of Model 2511C

2607C2607C – Curve Roller Conveyor with 2.62″ Diameter, 7 Gauge Curve

2.5″ Diameter 11 ga. Gravity Roller Curves are used to provide smooth product flow through turns. Curves will convey products with minimum degree of pitch based on weight and size. Optional guard rails may be added for product protection.

2607C SPECIFICATIONS

• BETWEEN FRAMES: 6″ – 61″
• DEGREE: 90, 45, 30
• ROLLERS: 2511 Roller – 2.5″ dia., 11ga wall tubes. 2607 Roller – 2.625″ dia., 7ga
wall tubes. Both rollers have 11/16″ hex cold rolled steel axle, spring retained.
Standard A50 bearings are light oil lubricated. Optional bearings include
combinations of precision, semi-precision and non-precision construction with
light oil or grease packed lubrication. 750 lbs roller capacity.
• FRAMES: Standard FC96 set high 4″ x 1-1/2″ x 8ga formed steel channel with
bolted 2″ x 8ga galvanized angle crossties. Optional frames include FC19 channel
5″ & 4″ x 1-1/2″ x 8ga set high and low or FC39 channel 5” x 1-1/2” x 8ga set low.
• ROLLER SURFACE: Optional Orange Polyurethane, 1/8″ wall or galvanized tube.
(2511 ONLY)
• COUPLINGS: Bolted butt couplers standard on both ends of channel.
• FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors
include green, beige, gray, orange, black and yellow.
>> View PDF schematic of Model 2607C

25TRC25TRC – Curve Roller Conveyor with 2.50″ Diameter Tapered Rollers

2-5/8″ Diameter, 7 ga. Gravity Roller curves provide smooth product flow with a minimum angle of pitch based on weight and size. Optional guard rails may be added for product protection. The 25TRC is provided with tapered rollers to maintain product orientation, and is commonly used with 1912, 1916, and 2514 gravity roller conveyors.

25TRC SPECIFICATIONS

• BETWEEN FRAMES: 13″ – 39″
• DEGREE: 90 , 45 , 30
• ROLLERS: 2.500″ & 1.687″ dia., 14ga wall tapered tube with 7/16″ hex cold rolled
steel axles.
• FRAMES: Standard FC42 Set high 3-1/2″x1-1/2″x12 ga, formed steel channel with
bolted 2″ x 8ga galvanized angle crossties.
• ROLLER SURFACE: Optional galvanized tube.
• COUPLINGS: Bolted butt couplers Standard on both ends of channel.
• FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors
include green, beige, gray, orange, black and yellow.
>> View PDF schematic of Model 25TRC

1418SL1418SL – Gravity Spur, Left Hand Flow, 1.38″ Diameter, 18 ga. Rollers

1-3/8 in. Dia. Gravity Roller Spurs are used to divert off, or merge on, main trunk line conveyors at various angles. They are often used when several lines transfer onto a main conveyor line, from work stations or similar applications.

1418SL SPECIFICATIONS

• BETWEEN FRAMES: 10″ – 22″ (See chart)
• LENGTH: 24″ – 57″ (See chart)
• ROLLER CENTERS: 1.5″, 3″, 4.5″, 6″
• DEGREE: 30 , 45 (See chart)
• ROLLERS: 1.375″ dia., 18 ga. wall galvanized tubes with 1/4″ round cold rolled steel axles, spring retained. Standard A02 bearings are light oil lubricated. 50 lbs. roller capacity.
• FRAMES: Standard F98 set high 2-1/2″ x 1″ x 12ga formed steel channel with bolted 1-1/8″ x 12ga angle crossties. Optional F33 set low 3-1/2″ x 1″ x 12ga.
• ROLLER SURFACE: Standard galvanized tube. Optional roll covers includes Orange Polyurethane, 1/8″ wall.
• COUPLINGS: Standard Hooks on one end.
• FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors include green, beige, gray, orange, black and yellow.
>> View PDF schematic of Model 1418SL

graphic 1418s


1418SR1418SR – Gravity Spur, Right Hand Flow, 1.38″ Diameter, 18 ga. Rollers

1-3/8 in. Dia. Gravity Roller Spurs are used to divert off, or merge on, main trunk line conveyors at various angles. They are often used when several lines transfer onto a main conveyor line, from work stations or similar applications.

1418SR SPECIFICATIONS

• BETWEEN FRAMES: 10″ – 22″ (See chart)
• LENGTH: 24″ – 57″ (See chart)
• ROLLER CENTERS: 1.5″, 3″, 4.5″, 6″
• DEGREE: 30 , 45 (See chart)
• ROLLERS: 1.375″ dia., 18 ga. wall galvanized tubes with 1/4″ round cold rolled steel axles, spring retained. Standard A02 bearings are light oil lubricated. 50 lbs. roller capacity.
• FRAMES: Standard F98 set high 2-1/2″ x 1″ x 12ga formed steel channel with bolted 1-1/8″ x 12ga angle crossties. Optional F33 set low 3-1/2″ x 1″ x 12ga.
• ROLLER SURFACE: Standard galvanized tube. Optional roll covers includes Orange Polyurethane, 1/8″ wall.
• COUPLINGS: Standard Hooks on one end.
• FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors include green, beige, gray, orange, black and yellow.
>> View PDF schematic of Model 1418SR

graphic 1418s2


1916SL1916SL – Gravity Spur, Left Hand Flow, 1.90″ Diameter, 16 ga. Rollers

1.9″ Diameter 16 ga. Gravity Roller Spurs are used to divert off, or merge on, main trunk line conveyors at various angles. They are often used when several lines transfer onto a main conveyor line, from work stations or similar applications.

1916SL SPECIFICATIONS

• BETWEEN FRAMES: 13″ – 51″ (See chart)
• LENGTH: 28″ – 106″ (See chart)
• ROLLER CENTERS: 3″, 4.5″, 6″
• DEGREE: 30 , 45 (See chart)
• ROLLERS: 1.9″ dia., 16ga wall tubes with 7/16″ hex cold rolled steel axles, spring retained. Standard bearings are light oil lubricated. Optional bearings include combinations of precision, semi-precision, and non-precision construction with light oil or grease packed lubrication.
• FRAMES: Standard F97 set high 3-1/2″ x 1″ x 12ga formed steel channel with bolted 2″ x 8ga galvanized angle crossties. Optional F38 set low 4-1/2″ x 1-1/2″ x 12ga.
• ROLLER SURFACE: Optional Orange Polyurethane, 1/8″ wall or galvanized tube.
• COUPLINGS: Bolted butt couplers standard on one end of channel.
• FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors include green, beige, gray, orange, black and yellow.
>> View PDF schematic of Model 1916SL

graphic 1916s


1916SR1916SR – Gravity Spur, Right Hand Flow, 1.90″ Diameter, 16 ga. Rollers

1.9″ Diameter 16 ga. Gravity Roller Spurs are used to divert off, or merge on, main trunk line conveyors at various angles. They are often used when several lines transfer onto a main conveyor line, from work stations or similar applications.

1916SR SPECIFICATIONS

• BETWEEN FRAMES: 13″ – 51″ (See chart)
• LENGTH: 28″ – 106″ (See chart)
• ROLLER CENTERS: 3″, 4.5″, 6″
• DEGREE: 30 , 45 (See chart)
• ROLLERS: 1.9″ dia., 16ga wall tubes with 7/16″ hex cold rolled steel axles, spring retained. Standard bearings are light oil lubricated. Optional bearings include combinations of precision, semi-precision, and non-precision construction with light oil or grease packed lubrication.
• FRAMES: Standard F97 set high 3-1/2″ x 1″ x 12ga formed steel channel with bolted 2″ x 8ga galvanized angle crossties. Optional F38 set low 4-1/2″ x 1-1/2″ x 12ga.
• ROLLER SURFACE: Optional Orange Polyurethane, 1/8″ wall or galvanized tube.
• COUPLINGS: Bolted butt couplers standard on one end of channel.
• FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors include green, beige, gray, orange, black and yellow.
>> View PDF schematic of Model 1916S

graphic 1916s2


If you have any questions about the models of gravity conveyors on this page, please call us at (724) 969-1188 or use our online contact form. We’ll help you identify the best solution that fits your project needs—as well as your budget.

–Jim & Ben Heinrich