Chain Transfers

Chain Transfers Conveyors provide a method for right angle, directional changes from within Chain Driven Live Roller Conveyors. They consist of a pneumatic lift device that projects a series of chain strands up through the gap between the chain rollers, to drive the heavy load offline. These conveyors are commonly used to move heavier, larger loads such as: pallets, containers or other unit loads onto adjoining conveyors, work stations and load/ unload zones.

If you have any questions about chain transfers, simply call us at (724) 969-1188 or use our online contact form.

Models Of Chain Transfers



T01C25_Large
T01C25 – CHAIN TRANSFER, 1,500 LB. CAPACITY, INTERNAL DESIGN WITH CDLR25 CONVEYOR

The 1500 lb. capacity Model T01C25 is a CDLR25 conveyor with integral pneumatic actuated pop-up chain transfer. Transfer chains are kept within the effective width of the CDLR. This rugged design is ideal for transferring pallets and containers with bottoms capable of conveying at right angles over the small gap that exists because of the conveyor side frame rail.

T01C25 SPECIFICATIONS:

• EFFECTIVE WIDTH (EW): 31″ to 61″
• ELEVATION: 12″ top of roller minimum
• LENGTH(LG) : 60″ to 120″
• NUMBER OF STRANDS (NS): 2, 3 or 4
• SPEED: 30 – 60 Feet Per Minute
• ROLLER CENTERS (RC): 4″, 4-1/2″, 6″ CHAIN CENTERS (TC): 12″ to 48″
• MOTOR: 3/4 HP through 1 HP. Energy efficient and inverter duty motors also available. Voltages include 120/1/60, 230/3/60, 460/3/60, 575/3/60 & DC Voltage.
• ROLLER BEARING: Precision ABEC style with 11/16″ hexagon axle
CHAIN: #C60, single pitch flat top conveyor chain, 3/4″ pitch
• AIR REQUIREMENTS: Transfer lift is pneumatically actuated, requires approximately 0.10 Ft³ of 60 PSI air per lift cycle. Includes FLR unit and (2) position double solenoid valve, 120 volt AC or 24 volt DC coils.
• ELECTRICAL REQUIREMENTS: Includes up and down position proximity switches, 20 to 250 volt AC/DC, prewired and terminated in 6” square junction box on outside of conveyor frame. Photo-eye sensor available as option for product detection.
• STOP: Fixed or retractable product stops available as an option
ROLLER COVER: Standard roller finish is carbon steel. Options for galvanized steel, urethane covers, or Ultrex accumulation sleeves also available
• SUPPORTS: Minimum top of roller elevation is 12”, supports available for up to 48” elevation
• FRAME FINISH: Standard finish is OSHA safety blue. Optional colors include green, beige, gray, orange, black and yellow
>> View PDF schematic of Model T01C25

t02c25-largeT02C25 – CHAIN TRANSFER, 1,500 LB. CAPACITY, EXTERNAL DESIGN WITH CDLR25 CONVEYOR

The 1500 lb. capacity Model T02C25 is a CDLR25 conveyor with integral pneumatic actuated pop-up chain transfer. The external transfer design is useful for transferring pallets and containers where pallet bottom conditions require minimal gaps in order to convey.

T02C25 SPECIFICATIONS:

• EFFECTIVE WIDTH (EW): 31″ to 61″
• ELEVATION: 12″ top of roller minimum
• LENGTH(LG) : 60″ to 120″
• NUMBER OF STRANDS (NS): 2, 3 or 4
• SPEED: 30 – 60 Feet Per Minute
• ROLLER CENTERS (RC): 4″, 4-1/2″, 6″
• CHAIN CENTERS (TC): 12″ to 48″
• MOTOR: 3/4 HP through 1 HP. Energy efficient and inverter duty motors also available. Voltages include 120/1/60, 230/3/60, 460/3/60, 575/3/60 & DC Voltage.
• ROLLER BEARING: Precision ABEC style with 11/16″ hexagon axle
CHAIN: #C60, single pitch flat top conveyor chain, 3/4″ pitch
• AIR REQUIREMENTS: Transfer lift is pneumatically actuated, requires approximately 0.10 Ft³ of 60 PSI air per lift cycle. Includes FLR unit and (2) position double solenoid valve, 120 volt AC or 24 volt DC coils.
• ELECTRICAL REQUIREMENTS: Includes up and down position proximity switches, 20 to 250 volt AC/DC, prewired and terminated in 6” square junction box on outside of conveyor frame. Photo-eye sensor available as option for product detection.
• STOP: Fixed or retractable product stops available as an option
• ROLLER COVER: Standard roller finish is carbon steel. Options for galvanized steel, urethane covers, or Ultrex accumulation sleeves also available
• SUPPORTS: Minimum top of roller elevation is 12”, supports available for up to 48” elevation
• FRAME FINISH: Standard finish is OSHA safety blue. Optional colors include green, beige, gray, orange, black and yellow
>> View PDF Schematic of Model T02C25

T03C25_LargeT03C25 – CHAIN TRANSFER, 4,000 LB. CAPACITY, INTERNAL DESIGN WITH CDLR25 CONVEYOR

The Model T03C25 is a chain roller conveyor with integral pneumatic actuated pop-up chain transfer similar to T01C25 except for handling up to 4,000 pound loads. Transfer chains are kept within the effective width of the CDLR. This rugged design is ideal for transferring pallets and containers with bottoms capable of conveying at right angles over the small gap that exists because of the conveyor side frame rail.

T03C25 SPECIFICATIONS:

• EFFECTIVE WIDTH (EW): 31″ to 61″
• ELEVATION: 12″ top of roller minimum
• LENGTH(LG) : 60″ to 120″
• NUMBER OF STRANDS (NS): 2, 3 or 4
• SPEED: 30 – 60 Feet Per Minute
• ROLLER CENTERS (RC): 4″, 4-1/2″, 6″ CHAIN CENTERS (TC): 12″ to 48″
• MOTOR: 3/4 HP through 1 HP. Energy efficient and inverter duty motors also available. Voltages include 120/1/60, 230/3/60, 460/3/60, 575/3/60 & DC Voltage.
• ROLLER BEARING: Precision ABEC style with 11/16″ hexagon axle
• CHAIN: #C60, single pitch flat top conveyor chain, 3/4″ pitch
• AIR REQUIREMENTS: Transfer lift is pneumatically actuated, requires approximately 0.10 Ft³ of 60 PSI air per lift cycle. Includes FLR unit and (2) position double solenoid valve, 120 volt AC or 24 volt DC coils.
• ELECTRICAL REQUIREMENTS: Includes up and down position proximity switches, 20 to 250 volt AC/DC, prewired and terminated in 6” square junction box on outside of conveyor frame. Photo-eye sensor available as option for product detection.
• STOP: Fixed or retractable product stops available as an option
• ROLLER COVER: Standard roller finish is carbon steel. Options for galvanized steel, urethane covers, or Ultrex accumulation sleeves also available
• SUPPORTS: Minimum top of roller elevation is 12”, supports available for up to 48” elevation
• FRAME FINISH: Standard finish is OSHA safety blue. Optional colors include green, beige, gray, orange, black and yellow
>> View PDF Schematic of Model T03C25

T04C25_LargeT04C25 – CHAIN TRANSFER, 4,000 LB. CAPACITY, EXTERNAL DESIGN WITH CDLR25 CONVEYOR

The Model T04C25 is a chain roller conveyor with integral chain transfer similar to T02C25 except for handling up to 4,000 pound loads. The external transfer design is useful for transferring full pallets and containers where pallet bottom conditions require minimal gaps in order to convey.

T04C25 SPECIFICATIONS:

• EFFECTIVE WIDTH (EW): 31″ to 61″
• ELEVATION: 12″ top of roller minimum
• LENGTH(LG) : 60″ to 120″
• NUMBER OF STRANDS (NS): 2, 3 or 4
• SPEED: 30 – 60 Feet Per Minute
• ROLLER CENTERS (RC): 4″, 4-1/2″, 6″
• CHAIN CENTERS (TC): 12″ to 48″
• MOTOR: 3/4 HP through 1 HP. Energy efficient and inverter duty motors also available. Voltages include 120/1/60, 230/3/60, 460/3/60, 575/3/60 & DC Voltage.
• ROLLER BEARING: Precision ABEC style with 11/16″ hexagon axle
CHAIN: #C60, single pitch flat top conveyor chain, 3/4″ pitch
• AIR REQUIREMENTS: Transfer lift is pneumatically actuated, requires approximately 0.10 Ft³ of 60 PSI air per lift cycle. Includes FLR unit and (2) position double solenoid valve, 120 volt AC or 24 volt DC coils.
• ELECTRICAL REQUIREMENTS: Includes up and down position proximity switches, 20 to 250 volt AC/DC, prewired and terminated in 6” square junction box on outside of conveyor frame. Photo-eye sensor available as option for product detection.
• STOP: Fixed or retractable product stops available as an option
• ROLLER COVER: Standard roller finish is carbon steel. Options for galvanized steel, urethane covers, or Ultrex accumulation sleeves also available
• SUPPORTS: Minimum top of roller elevation is 12”, supports available for up to 48” elevation
• FRAME FINISH: Standard finish is OSHA safety blue. Optional colors include green, beige, gray, orange, black and yellow
>> View PDF Schematic of Model T04C25

If you have any questions about the models of chain transfers on this page, please call us at (724) 969-1188 or use our online contact form. We’ll help you identify the best solution that fits your project needs—as well as your budget.

–Jim & Ben Heinrich