Ball Table



Ball Transfers are used to manually rotate, reposition, or remove flat bottom surfaced products easily and efficiently. They can be used on the floor, as stand-alone tables or inserted into non-powered conveyor systems.

If you have any questions about ball tables, simply call us at (724) 969-1188 or use our online contact form.

Models of Ball Tables



BPA – PLATE STYLE BALL TRANSFER TABLE, BALLS IN STRAIGHT PATTERN

BPA_LargeThese units are designed to be placed on an existing work table, scissor table or cart.

BPA PDF Download

BPA SPECIFICATIONS:

• WIDTH: 12″ – 50″
• LENGTH: 12″ – 120″
• BALL CENTERS: 1-1/2” (staggered only), 2″, 3″, 4″, 6″
• BALL TRANSFER: Standard 1″ diameter steel ball transfer with 1/4-20 UNC stud
mount. Optional ball transfers include stainless steel surface, nylon surface and
steel surface with flange.
• BALL COVER: Standard is no ball cover. Optional ball cover available.
• FRAME: Standard 12ga formed steel plate with angle stiffeners located on
nominal 12″centers and on both ends.
• MOUNTING: Standard 7/16″ mounting holes on both ends.
• GUARDRAIL: Standard is no guardrail. Optional 12ga formed steel angle side and
end guardrails. 2″, 3″, 4″ height. Available one side or both sides.
• FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors
include green, beige, gray, orange, black and yellow.

BPB – DEEP PLATE STYLE BALL TRANSFER TABLE, STRAIGHT BALL PATTERN

BPB_LargeDesigned as a free-standing transfer table with smooth edges. Accepts standard LEWCO SPM and SPH series supports.

BPB PDF Download

BPB SPECIFICATIONS:

• WIDTH: 12″ – 50″
• LENGTH: 12″ – 120″
• BALL CENTERS: 1-1/2” (staggered only), 2″, 3″, 4″, 6″
• BALL TRANSFER: Standard 1″ diameter steel ball transfer with 1/4-20 UNC stud
mount. Optional ball transfers include stainless steel surface, nylon surface and
steel surface with flange.
• BALL COVER: Standard is no ball cover. Optional ball cover available.
• FRAME: Standard 12ga formed steel plate with angle stiffeners located on
nominal 12″centers and on both ends.
• MOUNTING: Standard 7/16″ mounting holes on both ends.
• SUPPORTS: SPM, SPH and SPS supports available.
• GUARDRAIL: Standard is no guardrail. Optional 12ga formed steel angle side and
end guardrails. 2″, 3″, 4″ height. Available one side or both sides.
• FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors
include green, beige, gray, orange, black and yellow.

BPC – CONVEYOR FRAME STYLE BALL TRANSFER, STRAIGHT BALL PATTERN

BPC_LargeThe BPC style ball table is built as a complete section that can be utilized as a free standing unit or coupled to existing sections of gravity roller conveyor and are typically used as transition or positioning areas within the line. The frames are designed to accept standard LEWCO supports.

BPC PDF Download

BPC SPECIFICATIONS:

• WIDTH: 9″ – 51″
• LENGTH: 18″ – 120″
• BALL CENTERS: 1-1/2” (staggered only), 2″, 3″, 4″, 6″
• BALL TRANSFER: Standard 1″ diameter steel ball transfer with 1/4-20 UNC stud
mount. Optional ball transfers include stainless steel surface, nylon surface, and
steel surface with flange.
• BALL COVER: Standard is no ball cover. Optional ball cover available.
• FRAME: Standard 12ga formed steel channel rails with 12ga formed pans.
• COUPLING: Standard bolted butt couplers on both ends of channel.
• SUPPORTS: SPM, SPH and SPS supports available.
• GUARDRAIL: Standard is no guardrail. Optional 12ga formed steel channel side
guardrails. 2″, 4″, 6″, 8″, 12″ height. Available one side or both sides.
• FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors
include green, beige, gray, orange, black and yellow.

BPD – DROP IN CONVEYOR FRAME STYLE BALL TRANSFER, STRAIGHT BALL PATTERN

BPD_LargeBPD plates are designed to replace rollers in existing sections of gravity roller conveyor and are typically used as transition or positioning areas within the line.

BPD PDF Download

BPD SPECIFICATIONS

• WIDTH: 9″ – 51″
• LENGTH: 2″, 6″, 9″, 12″
• BALL CENTERS: 1-1/2” (staggered only), 2″, 3″, 4″, 6″
• BALL TRANSFER: Standard 1″ diameter steel ball transfer with 1/4-20 UNC stud
mount. Optional ball transfers include stainless steel surface, nylon surface, and
steel surface with flange.
• BALL COVER: Standard is no ball cover. Optional ball cover available.
• FRAME: Standard 12ga formed steel plate with 7/16″ holes for attaching to rails.
• GUARDRAIL: Standard is no guardrail. Optional side and end guardrails are
available on one side or both sides.
• FRAME FINISH: Standard finish is OSHA safety blue powder. Optional colors
include green, beige, gray, orange, black and yellow.

If you have any questions about the models of ball tables on this page, please call us at (724) 969-1188 or use our online contact form. We’ll help you identify the best solution that fits your project needs—as well as your budget.

–Jim & Ben Heinrich